Filter
Top Products
29
5 OPTIONAL SETTINGS
5.1 ENTERING AND USING THE OPTIONAL SETTINGS FEATURE
Fitness club managers and other authorized personnel can use the Optional Settings feature to
change default settings, or to enable or disable certain programs or displays on the console.
To enter the Optional Settings, while the unit is on, hold down the UP ARROW key, and press
CLEAR twice. The MESSAGE CENTER displays a program version number. Press the ENTER key.
The MESSAGE CENTER displays “OPTIONAL SETTINGS”. Scroll forward through the options
using the ENTER key, or backward, using the CLEAR key. For each feature or setting option, the
MESSAGE CENTER displays the default setting. To change the default, press the UP or DOWN
ARROW key for the desired value. Press ENTER to select the new value or setting and proceed to
the next setting.
To exit Optional Settings, press the CLEAR key repeatedly until the MESSAGE CENTER
displays “SELECT WORKOUT OR PRESS QUICK START”. Or, after the last setting has been
displayed and it is impossible to scroll forward by pressing ENTER, hold down the QUICK START
key, and press CLEAR. The MESSAGE CENTER then displays the prompt to select a workout.
Setting Default Value Description
MAX WORKOUT 60 minutes This is the maximum possible duration for a
DURATION workout. The value can range from 10 to 99.
ENGLISH/METRIC ENGLISH* This option determines the units of weight
UNITS METRIC** measurement used by workouts.
WATTS DISPLAY DISABLED* If this option is enabled, the MESSAGE CENTER
ENABLE/ ENABLED** displays the Watts equivalent of the step rate.
DISABLE
(93Si only)
METS DISPLAY DISABLED* If this option is enabled, the MESSAGE CENTER
ENABLE/ DISABLED** displays the Mets equivalent of the step rate.
DISABLE
(93Si only)
CAL/HR DISPLAY ENABLED* If this option is enabled, the MESSAGE CENTER
ENABLE/ DISABLED** displays the number of calories burned per hour
DISABLE during the workout.
WATTS PROGRAM DISABLED* If this option is enabled, the Watts workout becomes
ENABLE/ ENABLED** an available workout on the stairclimber.
DISABLE
(93Si only)
METS PROGRAM DISABLED* If this option is enabled, the Mets workout becomes
ENABLE/ ENABLED** an available workout on the stairclimber.
DISABLE
(93Si only)
USER LANGUAGE SELECT DISABLED This option, if enabled, gives users the ability to select
a language for use during a workout. See the topic
entitled User Language Select, in this section.
*Applies to units programmed to perform measurements in English system.
**Applies to units programmed to perform measurements in Metric system.
OPTIONAL
SETTINGS