Filter
Top Products
14
F
ITNESS NETWORKING AND ENTERTAINMENT (91TI ONLY)
A network port on the console of the Life Fitness treadmill allows the unit to be connected to a
fitness entertainment system and/or a network, such as the FitLinxx
TM
interactive fitness network.
• Fitness network: The network connection enables the console to upload user workout
statistics to a fitness network database or to download remotely stored information, such
a pre-set workout program. See Section 4.2, titled Using the Workouts, for information
on logging onto a network.
• Entertainment: The network connection enables the console to power a third-party
receiver for use with a service such as the Cardio Theater
®
entertainment system or the
BroadcastVision
TM
entertainment system.
This port is located inside the console assembly. To access it, remove the left accessory tray.
See Section 6.5 for details. Then, remove the console assembly cover door. Locate the port and
plug in the network cable. Re-attach the console assembly cover door and the accessory tray.
Any use of the port for other than its intended purpose could void the product warranty.
POWER CORD ROUTING
The power cord run is attached to the treadmill motor pan. On units sold in the United States,
the cord runs out from the front panel of the motor pan on the right side.
On units sold elsewhere, the cord plugs into the bottom of the motor pan near the front, user left
corner. It is held in place by a clip.
Always run the power cord in front of the treadmill to plug it in. Do not run the power cord under-
neath, or along the side, of the unit.
A