Life Fitness 9100 Exercise Bike User Manual


 
The bikes seat post can be adjusted in half-inch increments within a 13-inch range. A total of 26
height settings are possible.
HOW TO ADJUST THE PEDAL STRAPS
The bike pedal straps keep the users shoes on the pedals during a workout. The straps should fit
comfortably, but they also should be tight enough to prevent shoes from slipping at any point in the
pedaling rotation. Before working out, a user should test and adjust the tightness of the straps.
On the 9100: The safety straps on the foot pedals of the Lifecycle exercise bike can be adjusted
to fit a variety of shoe sizes. The straps are held in place by two knobs that extend from either
side of each pedal. The inner knob extends sideways, that is, toward the bike. The outer knob
extends downward. The ends of each strap are perforated with slots that fit tightly over the
knobs. The inner end of each strap is perforated with two slots, and the outer segment of the
strap is perforated with a row of slots. To tighten or loosen a strap, grasp the outer end, and pull
it back, away from the knob, until the strap slides off. Pull the strap out through the outer loop on
the pedal. Rest the foot on the pedal, and wrap the strap over the foot to determine the proper
length. Thread the strap through the outer loop on the pedal, tuck it under the pedal, select the
appropriate slot, and pull that slot down over the knob, until the top of the knob pops through the
slot. A click indicates that the strap is locked into place.
8