Life Fitness 8211 Home Gym User Manual


  Open as PDF
of 7
 
6
FIGURE 5
STEP 5:
0
1 2 3 4 5
6
1/2 1/2 1/2 1/2 1/2 1/2
• Route threaded end of new CABLE (66710) (2) around pulleys in TOP BOOM, PULLEY BLOCK ASSEMBLY, and TOWER
BRACE as shown in FIGURE 6.
STEP 6:
• Place TOWER BRACE over the GUIDE RODS and securely fasten TOWER BRACE to TOWER using previously removed 1/2” X 4”
BOLTS, 1/2” WASHERS, AND 1/2” NUTS as shown in FIGURE 5.
• Slide the SHAFT COLLARS to the top of the GUIDE RODS and SECURELY tighten the SHAFT COLLAR SET SCREWS .
FIGURE 6
2
1/2 X 4” BOLT
(EXISTING)
TOWER
BRACE
GUIDE
RODS
TOWER
SHAFT
COLLARS
• Retighten any loosened pulley connections.
 previous