Filter
Top Products
7
STEP 6
FIGURE 6
• Assemble the previously removed 2” PULLEY to the bracket on the TOP BOOM using one 3/8 X 1” BOLT (11), one previously removed
3/8” WASHER, and one previously removed 3/8” LOCK NUT. See FIGURE 6.
• (NOTE: STEP 6 is only completed if the 100101 LEG PRESS OPTION is installed otherwise proceed to STEP 7.)
• Assemble the previously removed ELASTIC CORD over the 2” PULLEY as shown in FIGURE 6.
TOP BOOM
3/8” LOCK NUT
2” PULLEY
3/8” WASHER
3/8 X 1” 11
FIGURE 7
STEP 7
• LOOSELY assemble one 4-1/2” PULLEY (6) to the TOP BOOM using one 3/8 X 2-3/4” BOLT (13), two 3/8” FLANGE SPACERS (12),
and one 3/8” LOCK NUT (14). See FIGURE 7.
6
12
12
14
13 3/8 X 2-3/4”
TOP BOOM