Filter
Top Products
34
To illuminate the reticle:
1. Grasp the illumination dial located at the top of the
eyepiece shell.
2. Turn the dial clockwise from the OFF position to the first
number indicated on the dial.
3. View the target through the scope to determine if the reticle is
bright enough to stand out clearly against the target.
4. If more illumination is required, continue turning the dial
clockwise until the reticle is clearly visible against the target.
To preserve the life of the battery, always remember to turn the
illumination dial to the OFF position when the scope is not in use.
For prolonged storage, remove the battery.
If the reticle fails to illuminate or appears dim even on the highest
illumination setting, it is necessary to change the battery.
WARNING: Always check to ensure that the firearm is unloaded
before changing the battery in the scope.