KTM 60 Bicycle User Manual


 
PERIODIC MAINTENANCE SCHEDULE 60/65 SX
Check transmission oil level ●●
Change transmission oil
Check spark plug and electrode gap
Check carburetor for tight fit on the intake flange ●●
Check intake manifold for leaks and cracks
Drain and clean carburetor float chamber ●●
Check idle setting when engine is warm
Check air filter, filter box and filter boot ●●
Check sprockets, chain guides and chain for wear ●●
Clean and lube chain ●●
Check chain tension ●●
Check coolant level ●●
Check quality of antifreeze
Check cooling system for leaks - visual inspection ●●
Check exhaust system for leaks
Check exhaust brackets ●●
Check brake fluid level ●●
Change brake fluid
Check brake lining thickness (rear) ●●
Check thickness of disc brake pads (front) ●●
Check brake drum and brake disc
Check freeplay and operation of hand brake lever and foot brake lever ●●
Inspect condition and installation of brake hose ●●
Check fork for function and tightness ●●
Service front fork completely
Check steering head bearing clearance / adjust ●●
Clean and grease steering head bearings
Check shock absorber for function and tightness ●●
Check bearings of swingarm for play
Clean and grease bearings of swingarm
Check tightness of spokes and rim join ●●
Check wheel bearings for clearance ●●
Check tire condition and air pressure ●●
Check cables for damage, correct instalment and easy working ●●
Lube and adjust cables ●●
Check all screws, nuts and hose clamps for proper tightness ●●
Grease or lube all pivot points and sliding components ●●
before each start
after washing
Service after 20
hours
once a year
KTM
rider
KTM
dealer
2.98
18