Filter
Top Products
4
Assembly
Unpack all parts and place them in a clear area. Be sure to remove all packing material.
STEP 1:
Attach Rear Upright (2) to
Rear Base Frame (1) using Bolt
(22), two Washers (28) and
Nylon Lock Nut (26).
Connect the Front Upright (4)
to the U Base Frame (5) using
two Bolts (22), four Washers
(28) and two Nylon Lock Nuts
(26).
NOTE: Hand Tighten bolts and nylon nuts until machine is fully assembled.
STEP 2:
Attach Cross Frame (3) to Rear
Upright (2) and Front Upright
(4) using four Bolts (19), eight
Washers (27) and four Nylon
Lock Nuts (25).