Filter
Top Products
ASSEMBLY
STEP 2
STEP 1
Y
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Connect Main Frame (2) to Front Base (3)
by securing with Bolt (15), Washers (17)
and Nylon Lock Nut (18).
Slide Upright Frame (1) into Main Frame
(2). Make sure that adjustment holes in
Upright Frame (1) face toward Main Frame
(2).
Slide Bolt (15) into Upright Frame (1) and
secure with Washers (17) and Nylon Lock
Nut (18). This bolt will keep the Main
Frame (2) connected to the Upright Frame
(1) during adjustments.