Filter
Top Products
[
ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 3
NOTE: The weight
stack assembly can be
connected to either side
of the machine.
Attach Base Frame for Weight (16) to Base Frame (1) using:
1 x (70) Big Plate 2 x (90) Bolt
4 x (84) Washer 2 x (105) Nylon Nut
Slide Guide Rods (18) down into Base Frame for Weight (16) and slide on
the following:
2 x (48) Weight Stack Bumper 5 x (19) 15 lb plate
9 x (20) 10 lb plate 5 x (21) 5 lb plate
1 x (25) Top Plate 1 x (17) Top Frame for Guide Rod
Secure Guide Rods (18) to Top Frame for Guide Rod (17) then connect to
Main Top Beam (4) using:
2 x (93) Bolt 2 x (85) Spring Washer
6 x (84) Washer 2 x (90) Bolt
1 x (71) Small Plate 2 x (105) Nylon Lock Nut