Filter
Top Products
9
STEP 5
Complete leg hold down assembly using:
1 x (10) Roller Pad Frame 2 x (30) Foam
2 x (43) Big Plug 1 x (14) Pop Pin
Note: If needed, it is recommended that a rubber mallet be used to
secure Big Plug (43).
Complete Seat Pad (20) assembly using:
2 x (7) Seat Pad Tube 1 x (35) Bolt
5 x (31) Washer 4 x (33) Bolt
Slide L Pin (22) through holes in Foot Plate (11) and Main Base (1).
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly