Filter
Top Products
STEP 1
Slide Linear Bearing (8), Clip, (9), Rubber Spacer (23), and
Plug onto Weight Support.
Slide Weight Support (1), Round Bumper (24) and Safety
Slide (4) onto Rod (7) in the order shown. Secure Right
Safety Hook (6) to Safety Slide (4) using Bolt (14),
Washers (16) and Nylon Lock Nut (15). Repeat for Left
Side using Left Safety Hook (5).
Slide Rubber Bumper (25) onto bottom of left side assem-
bly. Repeat for Right Side.
6
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly