Filter
Top Products
STEP 3
Connect Top Frame (4) to Half Cage and Guide Rods (7) using:
2 x (22) Bolt M12x80 2 x (25) Bolt M10x20
4 x (23) Washer M10 2 x (20) Washer 10
2 x (24) Nylon Lock Nut M12
Place High Pulley Cable (34) into positions using:
5 x (14) Big Pulley 4 x (21) Nylon Lock Nut
6 x (18) Big Pulley Spacer 2 x (26) Bolt M10x50
10 x (20) Washer 10 2 x (13) Plate for Pulley
3 x (19) Bolt M10x70
Place Low Pulley Cable (35) into positions using:
4 x (14) Big Pulley 4 x (21) Nylon Lock Nut
1 x (18) Pulley Bracket 2 x (19) Bolt M10x70
4 x (26) Bolt M10x50 8 x (20) Washer 10
8
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly