Filter
Top Products
STEP 1
Connect Main Frame (1) to U-Shaped Base (3) with Bolts
(28), Washers (32) and Nylon Lock Nuts (34).
Insert Slide Frame (7) onto Main Frame (1).
Connect Main Frame (1) to Rear Upright (2) with Bolt (27),
Washers (31) and Nylon Lock Nut (33). Make sure that
transport wheels face away from the unit as pictured.
Attach Seat Pin (10) and Spring (12) to Main Frame (1)
with Washer (32) and Locknut (34).
6
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly