Filter
Top Products
6
STEP 2
STEP 1
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Connect Main Frame (2) to Front Base
(5) by securing with Bolt (18), Washers
(19) and Nylon Lock Nut (20). Place EZ
Slides (11) into Main Frame (2).
Slide Upright Frame (1) into Main Frame
(2). Make sure that adjustment holes
in Upright Frame (1) face toward Main
Frame (2).
Slide Bolt (16) into Upright Frame (1)
and secure with Washers (19) and
Nylon Lock Nut (20). This bolt will keep
the Main Frame (2) connected to the
Upright Frame (1) during adjustments.
Assembly