Filter
Top Products
Assembly
16
Step 9
Note: Stretch all cables out completely and make sure all twisting is removed before installing.
Install Chest Press Cable (76) as detailed in Figure 9. Follow dotted lines to identify exact
location of pulleys.
Start by threading cable end into Top Plate (18).
You will need the following for installation:
Pulley (30) - Qty. 8
Cable (76) - Qty. 1
Nylon Locknut (92) - Qty. 2
Long Pulley Spacer (75) - Qty. 6
Longer Pulley Spacer (72) - Qty. 4
Bolt (79) - Qty. 2
Bolt (81) - Qty. 3
Bolt (83) - Qty. 2
Bolt (84) - Qty. 2
Washer (91) - Qty. 18
Figure 9
Nylon Locknut (93) - Qty. 7
Nylon Locknut (105) - Qty. 1
Pulley Bracket (28) - Qty. 1
Knob Bolt (24) - Qty. 1
Small Pulley (98) - Qty. 1