Filter
Top Products
Assembly
This HEALTH TRAINER 2.0 treadmill is shipped in one piece and fully assembled. After opening
the box, remove any packing materials from the treadmill. Do not throw away any packing materials
until the unit is working properly. Place the base on a clean, level surface. Make sure the electrical
cord will easily reach an electrical outlet.
Moving
CAUTION! TO AVOID THE RISK OF INJURY, NEVER ATTEMPT TO MOVE THE TREAD-
MILL WHILE IT IS IN THE UNFOLDED OPERATING POSITION. TO REDUCE THE
POSSIBILITY OF INJURY WHILE LIFTING, BEND YOUR LEGS AND KEEP YOUR BACK
STRAIGHT. AS YOU RAISE THE TREADMILL, LIFT USING YOUR LEGS, NOT YOUR
BACK. IN ORDER TO RAISE OR LOWER THE TREADMILL SAFELY, YOU MUST BE
ABLE TO LIFT 45 POUNDS (20KG). IT IS SUGGESTED YOU ALWAYS USE THE AID OF
A SECOND PERSON WHEN MOVING THE TREADMILL.
With the treadmill in the folded locked position (safety latch is engaged), grasp the handrails and
place one foot on the base as shown in the photo below. Next, with a firm grasp on handrails, place
one foot on the center of the base crossbar and carefully tilt the treadmill back until it rolls freely on
the wheels. Using extreme caution, move the treadmill to the desired location. To set the treadmill
down, place one foot on the center of the base crossbar and carefully lower treadmill onto base in
resting position. Do not attempt to move the treadmill over an uneven or rough surface.
7
Assembly Instructions