Filter
Top Products
4
3
3. Connect the Controller Extension Wire (28) in the Main
Upright (2) to the Controller Wire in the Main Frame
Assembly. Also, connect the Tension Control Wire in the
Main Upright to the Reed Switch Wire (27) in the Main
Frame Assembly as shown in the diagram. Then slide the
Main Upright (2) onto the Main Frame Assembly (1) and
secure with Screws (56), Flat Washers (50) and Locknuts (49).
4. First connect the Controller Wire (28) to the Console (5).
Then connect the Monitor (5) to the Main Upright (2) with the
Screws (59) already supplied in the back of the Console.
6 7