Filter
Top Products
7
Figure 1
Assembly, Moving Instructions
Assembly
The DISCOVERY 120 treadmill is shipped in one piece and fully assembled. After opening the box, remove
any packing materials from the treadmill. Do not throw away any packing materials until the unit is working
properly. Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical
outlet.
Moving
CAUTION! TO AVOID THE RISK OF INJURY, NEVER ATTEMPT TO MOVE THE TREADMILL
WHILE IT IS IN THE UNFOLDED OPERATING POSITION. TO REDUCE THE POSSIBILITY OF
INJURY WHILE LIFTING, BEND YOUR LEGS AND KEEP YOUR BACK STRAIGHT. AS YOU
RAISE THE TREADMILL, LIFT USING YOUR LEGS, NOT YOUR BACK. IN ORDER TO RAISE
OR LOWER THE TREADMILL SAFELY, YOU MUST BE ABLE TO LIFT 45 POUNDS (20KG). IT IS
SUGGESTED YOU ALWAYS USE THE AID OF A SECOND PERSON WHEN MOVING THE
TREADMILL.
With the treadmill in the folded locked position (safety latch is engaged), grasp the handrails and place one
foot on the base as shown in the photo below. Next, with a firm grasp on handrails, place one foot on the
center of the base crossbar and carefully tilt the treadmill back until it rolls freely on the wheels. Using
extreme caution, move the treadmill to the desired location. To set the treadmill down, place one foot on the
center of the base crossbar and carefully lower treadmill onto base in resting position. Do not attempt to
move the treadmill over an uneven or rough surface.