Filter
Top Products
5
6
5. Connect the computer cable at the top of the console tube (2)
to the console (5). Both computer cable connections have
white ends. Feed the pulse wires from the console (5) down
into the console tube (2) and out the front hole in the handle-
bar area. Attach the console tube (2) to the console (5) with
the screws (59) provided and already attached to back of the
console (5).
6. Attach the pulse wires in the handlebar (10) to the wires from
the console (5). Connect the handlebar (10) to the console
tube with the locknuts (49), flat washers (50) and screws (55)
provided. Make sure not to “pinch” any of the pulse wires
when connecting the handlebar to the console tube. Attach the
elbow pads (24) to the handlebar (10) with screws (60).
10 11
5
2
59
5
24
24
10
60
55
60
49
50