Filter
Top Products
6 7
1. Attach front stabilizer bar (2) to the main frame (1) with the
carriage bolts, arc washers and nuts (4,6,5).
Assembly of CardioMax Exercise Bike
2. Attach rear stabilizer bar (7) to the main frame (1) with the
carriage bolts, arc washers and nuts (9,6,5).
3. Tighten the pedals (46, 47) into the crank. Axles of pedals are
branded “L” and “R.” The pedal marked “R” goes on the right
hand side of the bike and the one marked “L” on the left hand
side. Tighten the left pedal by turning counter clockwise and
the right pedal by turning clockwise.
4. Connect the seat (54) to the seat post (51) with the nylon nuts
and washers (52, 53). Slide the seat post (51) into the main
frame (1) and secure with the adjustment knob (50).