Filter
Top Products
5. Turn LOCKING KNOB counterclockwise to loosen. Pull
LOCKING KNOB out and insert SEAT POST into SEAT
POST TUBE to desired seat height. Release LOCKING
KNOB so that it springs into a hole in the SEAT POST and
turn clockwise until tight to remove any looseness.
IMPOR
TANT:
LOCKING KNOB must be locked tightly
into hole in SEAT POST before you sit on
the SEAT.
8 9
6. Connect the two wires in the FRAME to the matching wires
in the CONSOLE TUBE. Make sure wires are securely
attached. Connect CONSOLE TUBE to FRAME with BUT-
TON HEAD SCREWS and FLAT WASHERS.