Keys Fitness 4500 Treadmill User Manual


 
Program and Operating Instructions
QUICK START / MANUAL MODE-EC6500HR
Plug into a surge protector outlet. Attach the
Red
Safety Key
on to the treadmill console.
Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
Press POWER button. There will be an eight (8) second delay after pressing the POWER button
before data can be entered. The TIME window will flash.
Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the
belt starts moving. Speed or incline may be adjusted by using the appropriate + (increase) or –
(decrease) button.
To end your workout
, press START/STOP button. Belt will gradually slow to zero.
To pause your workout
, press PAUSE.
To re-start after pausing
: Press the PAUSE button.
WARNING
:
THE TREADMILL BELT
WILL RESUME AT THE SPEED THE TREADMILL WAS MOVING BEFORE PAUSING.
Countdown Time, Preset Speed and/or Incline
: Time, Speed, and Incline may be preset prior to
getting started. After pressing the POWER button, the time window will blink. Use the SPEED/
TIME + or – arrows to select your workout time, then press the ENTER PROGRAM button. The
SPEED/TIME window will now be flashing. Using the same + or – arrows, select the speed for your
workout, then press ENTER PROGRAM. Now the INCLINE window will be flashing. Use the
INCLINE + or – arrows to set your workout incline, then press ENTER PROGRAM. To start, press
the START/STOP button.
PAGE 12
ENTER PROGRAM
POWER
START/STOP
PAUSE
INCLINE
SPEED/TIME