Filter
Top Products
5
As Easy As 3—2—1!
3. Unlock and fold the pedals
Using your thumb, compress and hold the spring
loaded pedal assembly as you fold the pedal into
its folded position, see figs. 3a-3c.
2. Unlock and fold the handlebars
Release the quick connect locking lever, then
swing the lever out of its captive slot. Swing the
handlebar assembly down to the side of the
frame, see fig. 2.
1. Unfold and lock the frame
Standing on the chain
side of the bike, release
the frame lock quick con-
nect lever, see fig. 1a.
Rotate the quick connect
lever, spring loaded bolt
and locking pin assembly
away from the frame. Slightly lift up on the quick
connect lever, spring loaded locking pin assembly
to allow the locking pin to disengage and the two
halves of the frame to separate, see fig 1b. Swing
the front and rear halves of the bike together.
Use the Hook & Loop strap to hold the frame in
the folded position by wrapping it around part of
the luggage rack, see figs. 1c & 1d.
Optional-Seat Assembly
To save additional space, you can lower the seat
assembly all the way down to the frame or com-
pletely remove it from the frame. Pull up the
quick release seat lever and flip over. Allow the
seat assembly to slide all the way down to the
frame or remove it completely.
Folding
3a
3c 3b
2
1a
1b
1c 1d