Filter
Top Products
15
Programs Setup and Selection (P1-P12)
1. Select Program: To start a program simply select the desired program by pressing on
either " /\ " or " \/ " buttons and then pressing the "Enter" button.
2. Select Level: Select the desired level (L1-L3) by pressing on either the
" /\ " or " \/ "
buttons and then pressing the "Enter" button.
3.
Set Time: Now choose how long you would like to workout by pressing either set of
" /\ " or
" \/ "
arrows. Each time you push the " /\ " or " \/ " button the workout time will change
by one minute. You can also hold these buttons down to
quickly scroll through the time. The
shortest preset program time is 10 minutes and the longest is 99 minutes.
4. Press Start: Once the desired time is selected, push the "Start" button to begin
your workout.
Target Heart Rate Program Setup
1.
Select Program: Use either " /\ " or " \/ " arrows to scroll through the programs
until "H1" is
shown on the center display. Then press the "Enter" button.
2. Select Age: Use either " /\ " or " \/ " arrows to enter the user age. Then press the
"Enter" button.
3. Set Target Heart Rate: Use either " /\ " or " \/ " arrows to set the target heart rate. Then
press "Enter". After a warm-up period, the program will automatically adjust the speed to
maintain the Target Heart Rate (Range From 60-180 bpm).
4. Set Target Max Speed / Incline: Use either " /\ " or " \/ " arrows to set the target max.
speed/incline. During the workout, the speed/incline of the treadmill will not exceed the
maximum speed or incline set during program setup.
5. Enter program Time: Use either " /\ " or " \/ " arrows to enter the program workout time.
Then press the "Start" button.
Notes:
1. This program requires that you keep you hands on the grip pulse pads while using the treadmill.
2. After pressing the “Start” button there is a 3 minute warm up. During the warm up the treadmill
include is adjusted to 5 and the speed is set at 2.0 MPH.
3. After warming up, the Heart Rate program will compare your actual heart rate with the target
heart entered during program set-up. If your actual heart rate is lower than your target heart rate
the treadmill will automatically adjust the belt speed .2 MPH. After 5 adjustments to the speed,
the incline level will be adjusted once. This process will repeat until you desired heart rate is
obtained.
4. If the speed increases up to the maximum speed that you set during program set up, the incline
will change until your heart rate is obtained.
5. If the console does not pick up your heart rate from the grip pulse within 30 seconds after warm
up the treadmill will stop.