Filter
Top Products
Assembly
8
FIGURE 7:
Step 1:
Using two Bolts (69), Washers (70) and
Cap Nuts (71), Attach the Left Upper
Handlebar Assembly (65L) to the Lower
Sleeve Assembly (67L).
Step 2:
Slide Lower Sleeve Assembly onto the
two Studs. Connect Lower Sleeve
Assembly with two Bolts (6), Washers
(72) and Cap Nuts (73).
Step 3:
Using Cap Nuts (73, 83), cover bolt
heads.
Step 4:
Repeat for Left side.
Stud
Stud
CONGRATULATIONS!!!!!!
You have completed Assembly of your New Ironman 120 e Elliptical.
FIGURE 6a: Connect the Tension Knob to the Resistance Cable. Fit the Resistance Control Cable into the
slot of the Tension Knob. Pull the brass end of the Resistance Control Cable over the lip of the Tension Knob
Bracket. The connection should look like Figure 6c when completed.
6a
6b
6c