Filter
Top Products
Assembly
7
Figure 3a
Figure 3b
Step 3
A) Plug the Upper Console Cable, the two Pulse Wires, and the Grounding Wire into the back of the
Console. See Figure 3a
B) Secure the Console to the Console Tube and secure in place using four M5*12mm Screws and four
Small Washers.
Note: Make sure not to pinch the wire when installing the console.
C) Attach the Bottle Holder to the Console Tube using two Screws.
Console
Console Tube
M5*12mm Screw
Small Washer
Grounding Wire
Pulse Wire
Upper Console Cable
Bottle Holder
Screw