Filter
Top Products
Assembly
7
FIGURE 3
Step 1:
Connect Cables (34a) to
(66a) and slide Endcap (80)
into place. Attach Endcap with
two Screws (70).
Note: Be careful not to pinch
the cables.
Step 2:
Slide Assembled Seat
Carriage (30) onto Seat
Bracket (21). Attach to brack-
ets using one Screw (84),
Spacers (83), Washer (63), and
Nut (62).
FIGURE 4
Step 1:
Thread the Right Pedal (31)
into the right crank area of Main
Frame (1). Secure in place by
turning it clockwise to tighten.
Note: Right Pedal (31) is
marked with an “R”.
Step 2:
Thread the Left Pedal (30)
into the left crank area of Main
Frame (1). Secure in place by
turning it counter-clockwise
to tighten.
Note: Left Pedal (30) is marked
with an “L”
Step 3:
Place Clamp (99) over cables,
and secure using Screw (70).
Figure 3
Figure 4