Filter
Top Products
7
Assembly
Figure 4
Step 1:
Connect pulse wires (71) to pulse wires
(45).
Step 2:
Secure the pulse wires by attaching the
cable clamp (42) to the seat carriage (19)
using screw (14).
Figure 5
Step 1:
Attach the left pedal (35) to the left
crank. The left pedal is marked with
an "L". Turn the threads on the pedal
counter-clockwise to secure it to the
crank.
Step 2:
Attach the right pedal (34) to the right
crank. The right pedal is marked with
an "R". Turn the threads on the pedal
clockwise to secure it to the crank.
Step 3:
Attach the pedal straps (35a and 34a)
to the appropriate pedal. Each strap is
marked with an "L" or an "R". The side
with 2 holes will go on the clip towards
the inside of the unit.