Filter
Top Products
Important Information
www.ironmanfitness.com
12
( LEFT )( RIGHT )
IM-Exploit
Stickers Placement
(Created 07/28/08)
Maintenance
How to change brake pad
To change the brake pad you must rmly hold the brake pad holder in
order to unscrew. Attempting to unscrew or shift the holder may
result in harmfully bending of the brake spring bar. While holding
the bar, use your allen wrench and a regular wrench to unscrew bolts.
Replace brake pad. Secure bolts tighlty again.
Maintenance
1. After every use of your Ironman bike, use a damp cloth to wipe your
unit free from sweat. You can use soap and water, or a diluted
non-abrasive cleaner. Remove residue and then dry.
2. Inspect the brake pad for excessive wear and replace the pad if
necessary. If you need replacement, please contact Ironman Customer
Service at 1-800-750-4766.
3. Inspect the drive belt for correct alignment, tension, or excessive wear.
If you experience any slipping while pedaling, it is possible there is not
enough tension on the belt. You will need to remove the plastic cover
to inspect the belt. This is done by removing the 4 screws that secure
the cover to the frame.