Filter
Top Products
SECTION 2—OPERATION
Part No 1148138 11 MA80 Series
FIGURE 2.1 Installing the Mattress Replacement System
Installing the Side Rails
ƽ WARNING
Patient entrapment with bed side rails may cause injury or death. Mattress MUST
fit bed frame and side rails snugly to prevent patient entrapment. Follow the
manufacturer’s instructions. Monitor patient frequently. Read and understand the
Owner’s/Operator’s Manual prior to using this equipment. Invacare product
manuals are available at www.invacare.com or your dealer.
NOTE: Refer to the instructions provided with the side rails for the installation procedure.
Installing the Control Unit
1. Pull out the bed hook on the back of the
control unit.
2. Place the control unit on the footboard.
NOTE: If the bed does not have a footboard,
place the control unit on a flat surface, leaving
room for the hose to hang down.
FIGURE 2.2 Installing the Control Unit
Hose
Foot End
Head End
Powered Mattress
Buckle
Straps
Bed Hook