Filter
Top Products
ICCG Bed Rails 6 Part No 1143214
Changing the Head Board Mounting Position
NOTE: For this procedure, refer to FIGURE 6.
NOTE: When using bed rails 6815A, 6816A or 6803A in conjunction with an 80-inch mattress,
the head board mounting brackets MUST be adjusted.
1. Remove the two mounting screws that secure head board mounting bracket to the bed
frame. See Detail “A”.
2. Secure the head board mounting bracket to the bed frame as shown in Detail “B” using
two mounting screws and locknuts. Securely tighten.
NOTE: Ensure mounting brackets are perpendicular to the floor.
3. Repeat STEPS 1-2 to install remaining head board mounting brackets.
FIGURE 6 Changing the Head Board Mounting Position
Changing the Mounting Position of the Mattress
Keepers
NOTE: For this procedure, refer to FIGURE 7 on page 7.
NOTE: When using bed rails 6815A, 6816A or 6803A in conjunction with an 80-inch mattress,
the mattress keepers on the head end of the mattress deck MUST be adjusted.
1. Remove the two mounting screws that secure the mattress keeper to the head end of
the mattress deck. See Detail “A”.
2. Secure the mattress keeper to the head end of the mattress deck as shown in Detail “B”
using two mounting screws and locknuts. Securely tighten.
Head Board Mounting Bracket
Bed Frame
Mounting Screws and
Locknuts
DETAIL “A”
NOTE: Mounting position of head
board mounting bracket for use with
80-inch mattress - without side rails
DETAIL “B”
NOTE: Mounting position of head board
mounting bracket for use with 80-inch mattress
- using side rails 6815A, 6816A, or 6803A
Mounting Screws and Locknuts
Bed Frame
Head Board Mounting Bracket
1-inch Gap2-inch Gap