Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended two or more people assembling this
machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the Left & Right Upright Beams (#1 & 2) by a Cross Brace (#3) in the mid-span.
Align the holes and secure each end of the Cross Brace with one 4 ¾” x 2 ¾” Bracket
(#20), two M10 x 2 ¾” Carriage Bolts (#38), two ∅ ¾” Washers (#26), and M10 Aircraft
Nuts (#47).
B.) Place Backrest Adjustment Bar (#8) between the two Upright Beams.
C.) Insert two Crutches (#7) into the top openings on the Upright Beams. Secure them with two
M18 Lock Knobs (#48) through selected holes to obtain desired height of the Supports.
6