Filter
Top Products
STEP 3 (See Diagram 3)
A.) Attach the Rear Vertical Beam (#6) to the top of the Cross Brace (#2). Attach the
Weight Glide Base (#8) to the Cross Brace from the Bottom. Align the holes. Secure
them with two M10 x 3” Carriage Bolts (#76), Ø ¾” Washers (#66), and M10 Aircraft
Nuts (#86).
B.) Attach the Backrest Board (#38) to the Rear Vertical Beam. Secure it with two M8 x 2
½” Allen Bolts (#80) and Ø 5/8” Washers (#65).
DIAGRAM 3
8