Filter
Top Products
STEP 3 (See Diagram3)
A.) Place the Seat (#11) onto the Main Frame (#2). Secure it with four M8 x 5/8” Allen Bolts (#30)
and Ø 5/8” Washers (#32).
B.) Place the Backrest Board (#12) onto the Backrest Supports. Secure it with four M6 x 1 3/8”
Hex Bolts (#29) and Ø ½” Washers (#33).
C.) Attach the Cross Tube (#5) to the Front Vertical Frame (#1). Secure it with a M10 Lock Knob
(#14).
D.) Insert the Foam Tube (#6) halfway through the hole on the Front Vertical Frame (#1). Push
four Foam Rolls (#17) onto the Tubes. Lubricate the inside of the Foam Grips (#16) with
water. Slide the Foam Grips onto the Foam Tube (#6) from both sides.
DIAGRAM 3
6