Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required to Assemble the Machine: Two Adjustable Wrenches and Allen Wrenches
NOTE: It is strongly recommended this machine be assembled by two or more people to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Slide the Sliding Block (#9) onto the Main Frame (#2) and secure it with a Quick Release
Knob (#26). Attach the Base Frame (#7) to the Main Frame (#2). Secure it with two M10 x 5/8”
Allen Bolts (#10) and two ∅ 7/8” Washers (#14).
B.) Attach the Base Frame (#7) to the Front Frame (#1). Secure it with two M10 x 5/8” Allen Bolts
(#10), two ∅ 7/8” Washers (#14).
C.) Attach the Main Frame (#2) to the Front Frame (#1). Secure it with a M10 x 3” Allen Bolt (#11),
two ∅ 7/8” Washers (#14) and a M10 Aircraft Nut (#17) to the lower hole. NOTE: DO NOT
over tighten the bolt. The joint needs to swivel in able to fold the bench for storage. Insert a L-
shaped Lock Pin (#18) to the upper hole.
D.) Attach the Cross Tube (#5) to the Front Frame (#1). Secure it with a M10 Knob Lock (#23).
DIAGRAM 1
4