Filter
Top Products
STEP 2 (See Diagram 2)
A.) Align the bracket on the Backrest Adjustment Support (#5) in between the two
Backrest Supports (#7). Secure it with four M8 x 1 5/8” Allen Bolts (#25), eight Ø 5/8”
Washers (#32), and four M8 Aircraft Nuts (#28). Do not tighten the Nuts and Bolts
yet.
B.) Insert the Backrest Adjustment Support into the opening on the Main Seat Support
(#1). Press or step down on the Backrest Adjustment Lever (#8) to allow the Support
to go through.
C.) Attach the bottom side-holes on the two Backrest Supports to the pivot on the Main
Seat Support(#1). Secure it with one M12 x 6 ½” Hex Bolt (#27), two Ø 1” Washers
(#33), and one M12 Aircraft Nut (#30). Securely tighten all Nuts and Bolts.
D.) Attach the two Seat Brackets (#6) to the Main Seat Support(#1). Secure each Seat
Bracket with two M10 x 3 5/8” Allen Bolt (#23), four Ø ¾” Washers (#31), and two
M10 Aircraft Nuts (#29).
DIAGRAM 2
6