Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended two or more people assembling this
machine to avoid possible injury.
STEP 1 (See Exploded Diagram)
A.) Attach each end of the Main Frame (#1) to the Stabilizers. Secure each end with two
M10 x ¾” Allen Bolts (#6) and ∅ ¾” Washers (#10).
B.) Attach two L-shaped Brackets (#3) to the holes on the Main Frame. Secure the
Brackets with one M10 x 4” Allen Bolt (#7), two Ø ¾” Washers (#10), and one M10
Aircraft Nut (#9). Repeat the same procedure to install other Brackets. Do not tighten
the Brackets yet.
C.) Place the Seat Pad (#4) onto the Main Frame. Align the holes to the Brackets. Secure it
with six M8 x ¾” Allen Bolts (#) and Ø 5/8” Washers (#11). Securely tighten all Nuts
and Bolts previously installed.
EXPLODED DIAGRAM
5