Filter
Top Products
STEP 4 (See Diagram 4)
A.) Attach the Seat (#18) to the Seat Post (#19). Secure it with three Flat Washers (#20),
Spring Washers (#21) and M8 Nylon Nuts (#22).
B.) Insert the Seat Post (#19) into the opening on the Main Frame (#1). Select the Seat height
and secure it with a Lock Knob (#17).
C.) Attach the Computer (#23) onto the computer holder on the Main Frame. Plug the
Computer Sensor Wire (#24) into the back of the Computer.
D.) Use the Resistant Adjustment Knob (#32) to adjust the resistance of the Fan Bike.
E.) After completing the assembly of the bike, inspect the bike both visually and functionally.
Make sure there is no loose part and all the nuts and bolts are tightened. Then try the bike
at slow pace to make sure everything is working properly. Do not use the bike and call our
customer service specialist if anything is abnormal.
F.) Carefully review all warnings affixed to the bike and in the manual before using the bike.
DIAGRAM 4
7