Filter
Top Products
STEP 5 (See Diagram 5)
A.) Attach the Front Press (#11) to the pivot on the Front Press Base (#10). Align the holes
and insert the Front Press Axle (#32) through the holes.
B.) Secure each end of the Axle with one M10 x ¾” Allen Bolt (#76) and ∅1 3/8” Washer
(#66). Secure the Axle to the Front Press with two M8 x ¾” Screws (#88).
C.) Thread a Short T-shape Lock Pin (#52) into the hole on the Front Press. Use the Lock Pin
to secure the desired Front Press exercise position.
D.) Attach the Butterfly Pulley Bracket (#17) to the Rear Base Frame (#2). Secure it with two
M10 x 2 ¾” Carriage Bolts (#72), ∅ ¾” Washers (#87), and M10 Aircraft Nuts (#89).
DIAGRAM 5
11