Filter
Top Products
STEP-1
A.) Do not tighten Bolts until instructed to do so.
B.) Attach the Front Stabilizer (#2) to the Main Frame (#1). Secure it with two M8 x 2 3/8” Carriage Bolts
(#15), two Ø 5/8” Curved Washers (#16), and two Acorn Nuts (#17).
C.) Attach the Rear Stabilizer (#3) to the Main Frame (#1). Secure it with two M8 x 2 3/8” Carriage Bolts
(#15), two Ø 5/8” Curved Washers (#16), and two Acorn Nuts (#17).
D.) Securely tighten all Bolts.
STEP 2
A.) NOTE: Extra help may be needed to hold the Front Post (#4) while connecting the cables
and wires.
B.) Attach the Front Post (#4) to the Main Frame (#1). Connect the Middle Computer Wire (#21) from
the bottom of the Front Post to the Lower Computer Wire (#22) from the Main Frame.
© IMPEX INC.
6