Filter
Top Products
Deep Groove
OPERATION NOTES
Weight Plate Selection
1. Use the Weight Selector Pin to select the number of weight plates to exercise.
2. Do not insert weight selector pin while the weight stack or top plate is in elevated position.
3. Be certain the weight Selector Pin is completely inserted.
4. Each Weight Plate weights approximately 16 lbs.
5. Please refer to Weight Resistance Chart page.
6. Never use dumbbells or other means to increase the weight resistance. Use only weight plates
provided by manufacturer.
7. For safety purpose while the equipment is not in use. Insert the Lock Pin into the hole
on Guide Rod, and use Combination Lock to lock the Pin to prevent the movement of
Weight Plates. Please refer to the Combination Lock set up.
Cable Tension Adjustment
Adjust the tension of the Cable System by moving the position of lower Pulley on the
Double Floating Pulley Brackets.
If the tension is too loose, move the lower pulley up by one notch.
If the tension is too tight, move the lower pulley down by one notch.
Lower Pulley
Arm Curl Pad Adjustment
Pull up and flip the Arm Curl Pad along the track on the Arm Curl Stand to face toward back when
doing Leg Press exercises.
Do not over tighten Allen Bolt (#90) so the Bolt can move along the track smoothly.
©IMPEX INC. www.impex-fitness.com
7