Filter
Top Products
STEP 3 (See Diagram 3)
A.) Attach the holes on the end of the two Backrest Supports (#8) to the pivot on the Main
Seat Support (#6). Secure the two Backrest Supports to the pivot with one M12 x 6 1/8”
Hex Bolt (#42), two Ø 1” Washers (#52), and one M12 Aircraft Nut (#56). Do not over
tighten the Nuts and Bolts. Make sure the Backrest Supports are able to swivel.
B.) Attach the two L-shaped Seat Brackets (#20) to the Main Seat Support. Align the holes.
Secure the two Brackets to the Main Seat Support with one M8 x 2 ½” Allen Bolt (#48),
two Ø 5/8” Washers (#54), and one M8 Aircraft Nut (#58).
C.) Attach the Backrest Board (#22) to the Backrest Supports. Secure it with four M8 x 1 5/8”
Allen Bolts (#49) and four Ø 5/8” Washers (#54).
D.) Place the Seat Pad onto the L-shaped Seat Brackets and Main Seat Support. Secure it
with two M8 x 5/8” Allen Bolts (#50), one M8 x 2 ½” Allen Bolt (#48), and three Ø 5/8”
Washers (#54).
DIAGRAM 3
9