Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches
NOTE: It is strongly recommended that two or more people assemble this machine
to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Plug the two Upright End Caps (#17) onto the bottom of the Right & Left Upright
Beams (#1 & #2). Secure each Cap with a ST5 Screw (#40).
B.) Connect the two Upright Beams by a Cross Brace (#4) in the Mid-span. Secure them
with two M10 x 3 1/8” Carriage Bolts (#27), one Curved Bracket (#13), two ∅ ¾”
Curved Washers (#37), and two M10 Aircraft Nuts (#38) on each end of Cross Brace.
C.) Insert the Backrest Adjustment Bar (#9) through the holes on the two Uprights to
obtain desired incline of Backrest.
DIAGRAM 1
5