Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and
Allen Wrenches
NOTE: It is strongly recommended this machine be assembled by two or
more people to avoid possible injury.
STEP 1 (See Exploded Diagram)
A.) Attach an Upright Support Frame (#2) to a Base Frame (#1). Secure it with
three M10 x 5/8” Allen Bolts (#6) and Ø ¾” Washers (#7). Note: Do not
tighten the Bolts yet. Repeat the same step to install the other Upright
Support Frame to the other Base Frame.
B.) Connect the two Upright Support Frames to the Seat Support Frame (#3)
from each end. Secure each Upright Support to the Seat Support Frame with
three M10 x 5/8” Allen Bolts (#6) and Ø ¾” Washers (#7). Securely tighten all
Bolts previously installed.
C.) Place the Seat (#4) onto the Seat Support Frame. Secure it with six M8 x
5/8” Allen Bolts (#9) and ∅ 5/8” Washers (#8).
EXPOLODED DIAGRAM
4