Impex IVK-402 Home Gym User Manual


 
STEP 3 (See Diagram 3)
A.) Place the Lower Dumbbell Rack (#6) onto the second level of dumbbell support on the
Right and Left Upright Beams.
B.) Secure each end with two M10 x 3” Allen Bolts (#15), four Ø ¾” Washers (#14), and two
M10 Aircraft Nuts (#13). Repeat the same procedure to install the other Lower Dumbbell
Rack.
C.) Cover all ends of Upper and Lower Dumbbell Racks with six Dumbbell Rack End Caps
(#12). Secure each End Cap with two ½” Philips Screws (#16).
DIAGRAM 3
7