Filter
Top Products
STEP 3 (See Diagram 3)
A.) Attach the Leg Developer (#5) to the Leg Developer Holder (#4). Secure it with one
M8 x 2 ¾” Allen Bolt (#29), two Ø 5/8” Washers (#36), and one M8 Aircraft Nut
(#34). Do not over tighten the Nut and Bolt. Make sure the Leg Developer is
able to swivel.
B.) Insert two Foam Tubes (#12) halfway through the holes on Leg Developer. Push
four Foam Rolls (#13) onto the Tubes from each end.
DIAGRAM 3
7