Impex IGS-5683 Home Gym User Manual


 
STEP 4 (See Diagram 4)
A.) Attach the two side-holes on the two Backrest Supports (#13) to the pivot on the Main
Seat Support (#4). Align the holes and secure it with one M12 x 7 ¼” Hex Bolt (#44),
two 1” Washers (#40), and one M12 Aircraft Nut (#51).
B.) Place the Backrest Board (#16) onto the Backrest Supports. Secure it with four M8 x 1
5/8” Allen Bolts (#49) and 5/8” Washers (#38).
C.) Attach the Seat (#17) to the two Seat Brackets (#6) and secure with four M8 x 1 5/8”
Allen Bolts (#49) and 5/8” Washers (#38).
D.) Place the Seat Brackets onto the Main Seat Support (#4). Align the holes and secure
each Seat Bracket to the Main Seat Support with one M10 x 2 ½” Allen Bolt (#46), two
Ø ¾” Washers (#39), and one M10 Aircraft Nut (#50).
DIAGRAM 4
9