Filter
Top Products
STEP 2 (See Diagram 2)
A.) Attach the Incline Support (#6) in between the two Seat Support Frames (#5).
B.) Attach the pivot on the Seat Support Frames (#5) to the pivot on the Main Frame (#3).
Secure them with one M12 x 6 7/8” Hex Bolt (#20) and M12 Aircraft Nut (#21).
C.) Place the Seat Pad (#9) onto the Seat Support Frames (#5). Secure it with four M6 x 1
5/8” Hex Bolts (#22) and Ø ½” Washers (#23).
D.) Insert the Foam Tube (#8) halfway through the hole on the Main Frame. Push two
Foam Rolls (#13) onto the Tube from both ends.
E.) Attach the Cross Tube (#7) to the selected hole on the Main Frame. Secure it with a
Lock Knob (#12). Push two Foam Rolls onto the Cross Tube from both ends.
DIAGRAM 2
6