Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Adjustable Wrench and Allen Wrench
NOTE: It is strongly recommended this machine to be assembled by two or more
people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach a Floor Stabilizer (#6) and a Lower Pivot Bracket (#35) to the Base Frame
(#3). Secure it with two M12 x 4” Carriage Bolts (#28), ∅ 1” Washers (#29), and
M12 Aircraft Nuts (#30).
B.) Insert the Lower Pulley Bracket (#14) into the hole on the Lower Pivot Bracket
(#35). Secure it with one M10 x 1” Allen Bolt (#38) and ∅ 1 ½” Washer (#39).
C.) Repeat the procedure A and B above to install the other side.
DIAGRAM 1
4